LEARN IR · STEP 1 · LESSON 4
Energy levels and transitions
The energy ladders of a molecule and what each step brings out in the spectrum.
About 17 minutes to read · Prerequisites: lesson 1, lesson 2 e lesson 3 · Updated October 24, 2026
Gaseous hydrogen chloride shows, in the infrared, dozens of sharp, evenly spaced lines. The same HCl in a liquid shows a broad band, without resolved lines. The molecule is the same, with the same bond. What changed? To answer, we need to look at the energy of the molecule as a ladder and realize that it has steps of very different sizes.
- order the electronic, vibrational and rotational energies and link each one to a region of the spectrum;
- recognize three ladders of levels (box, oscillator and rotor) and what decides the spacing of each;
- use the Boltzmann distribution to know which levels are occupied;
- read the vibrational-rotational structure of HCl and understand why it disappears in liquids and solids.
1. A ladder with steps of very different sizes
A molecule stores energy in four ways: by moving through space (translation), rotating (rotation), vibrating (vibration) and redistributing its electrons (electronic state). In absorption spectroscopy the last three matter; translational levels are so close together that they form, in practice, a continuum. Electrons are light and fast, and nuclei are heavy and slow. Therefore, to a good approximation (that of Born–Oppenheimer), the total energy is the sum of three parts, which barely interfere with each other:
E ≈ Eel + Evib + Erot
Each part has its own ladder, and the steps differ by orders of magnitude (Figure 1 and table).
| Motion | Typical step (cm⁻¹) | Region | Example |
|---|---|---|---|
| Rotation | ≈ 0.1 to 100 | microwaves and far infrared | HCl: 2B ≈ 21.2 cm⁻¹ |
| Vibration | ≈ 200 to 4000 | mid-infrared | C=O ≈ 1715 cm⁻¹ |
| Electronic | ≈ 10 000 to 100 000 | visible and ultraviolet | valence transitions |
Explore further: the Born–Oppenheimer approximation and its limits
The ratio between the mass of the electron and that of a nucleus is about 5 × 10⁻⁴ for hydrogen and 10⁻⁴ to 10⁻⁵ (or less) for heavier nuclei, which justifies treating the nuclei as fixed when solving the motion of the electrons and, afterwards, the motion of the nuclei in the resulting potential. The sum of energies is an approximation: rotation slightly changes vibration (a rotating molecule stretches, centrifugal distortion) and vibration changes rotation (the mean bond length changes with v, as will be seen in section 5). In electronic transitions, both effects combine and the separation is no longer rigorous (Atkins et al., 2018; Hollas, 2004).
2. Why are there steps? The idea of confinement
A confined wave only admits certain patterns: the guitar string of lesson 1 vibrates with half a wavelength, a whole wavelength, three halves… The same holds for a particle trapped in a region of space. The simplest model is the particle of mass m in a box of length L:
En = n² h² / (8 m L²) (n = 1, 2, 3, …)
The levels move apart when the particle is light or the box is narrow. That is why electrons, light and confined to dimensions of tenths of a nanometer, have huge steps, and nuclei, heavy, have small steps. The box is only a model: the real levels of molecules come from other potentials, which change the formula but not the logic. Figure 2 compares the three ladders that matter for vibrational spectroscopy.
Harmonic oscillator (the bond as a spring, lesson 5): Ev = hcν̃ (v + ½), with v = 0, 1, 2, … and ν̃ the wavenumber of the vibration. The spacing is constant, equal to hcν̃, and the lowest level is not zero but ½ hcν̃: the zero-point energy. A real molecule is anharmonic, and the steps shrink with v (Figure 2 of lesson 1).
Rigid rotor (two masses at a fixed distance r): EJ = hcB J(J + 1), with J = 0, 1, 2, … and each level J having 2J + 1 states of the same energy. The rotational constant is
B = h / (8π² c I) with I = μ r²
where I is the moment of inertia and μ the reduced mass. The spacing between J and J + 1 is 2B(J + 1): it grows with J. Light, short molecules have small I, large B and well-separated lines.
3. Which steps are occupied? The Boltzmann distribution
At thermal equilibrium at temperature T, the ratio between the populations of two levels is
Ni / Nj = (gi / gj) · exp[ −(Ei − Ej) / kBT ]
where g is the degeneracy (how many states share the same energy). In wavenumber, kBT/(hc) equals 207.2 cm⁻¹ at 298.15 K (lesson 2). That settles everything:
- Vibration: the step (≈ 2885 cm⁻¹ in HCl) is much larger than kBT/(hc). The ratio N(v = 1)/N(v = 0) is of the order of 10⁻⁶, and almost all molecules are in the vibrational ground state.
- Rotation: the step (≈ 21 cm⁻¹) is about ten times smaller than kBT/(hc). Many J levels are occupied, and the 2J + 1 degeneracy pushes the maximum away from J = 0.
For the rotor, the population of level J is proportional to (2J + 1) · exp[−B J(J + 1)/(kBT/hc)], and the maximum falls at Jmax ≈ √[ kBT / (2hcB) ] − ½ (Figure 3).
Explore further: homonuclear molecules and nuclear spin statistics
In homonuclear molecules (H₂, N₂, O₂), the symmetry of the exchange of identical nuclei allows only even or odd J levels (or both, with different weights), which alternates the intensity of the rotational lines (ortho- and para-hydrogen, for example). The population of each level then also depends on nuclear spin. HCl is heteronuclear and does not show this effect (Hollas, 2004).
4. Jumps between steps: transitions
A transition needs three things (lesson 1): resonance, ΔE = hcν̃; selection rule, that is, a nonzero transition moment; and population in the starting level. At thermal equilibrium, the lower level is more populated than the upper one, and so the net signal is one of absorption. Spontaneous emission (from the upper to the lower level) and stimulated emission (induced by the radiation itself) exist but, in the mid-infrared at room temperature, the upper level is hardly populated and absorption dominates. In simple models, the rules are:
| Motion | Rule (model) | Condition | Region |
|---|---|---|---|
| Pure rotation | ΔJ = ±1 | permanent dipole | microwaves and far IR |
| Vibration | Δv = ±1 (harmonic oscillator) | dipole change during the vibration | infrared |
| Vibration with rotation (gas) | Δv = ±1 and ΔJ = ±1 | dipole change | infrared |
| Electronic | depends on symmetry and spin | electronic transition moment | visible and ultraviolet |
Anharmonicity relaxes Δv = ±1 and allows overtones (lesson 1). For heteronuclear diatomic molecules in the electronic ground state (such as HCl), the jump ΔJ = 0 is forbidden in the infrared. The general selection rules are the topic of lesson 7.
5. The vibrational-rotational spectrum of HCl
In gaseous HCl, the 2885 cm⁻¹ band (lesson 1) splits into two branches. In the R branch, the molecule gains one unit of J on absorbing (ΔJ = +1), and the lines appear above the band center. In the P branch, it loses one (ΔJ = −1), and the lines appear below. Since ΔJ = 0 is forbidden, the central line is missing: there is a gap of about 4B. With J the lower level and B₀ and B₁ the constants of v = 0 and v = 1:
ν̃R(J) = ν̃₀ + (B₁ + B₀)(J + 1) + (B₁ − B₀)(J + 1)²
ν̃P(J) = ν̃₀ − (B₁ + B₀)J + (B₁ − B₀)J²
B₁ is slightly smaller than B₀, because the bond is, on average, longer in v = 1 (larger I, smaller B). That is why the lines of the R branch get closer together and those of the P branch spread apart. Intensities follow the population of the starting level (Figure 3), which gives the band a “two shoulders” shape with a maximum near J = 2 to 3 (Figure 4a).
6. From gas to liquid and solid
In liquids and solids, the molecule does not rotate freely: collisions and neighbors interrupt the rotation on timescales of the order of 0.1 ps or more. By the relation between mean lifetime and width (lesson 3), 0.1 ps corresponds to Δν̃ ≈ 53 cm⁻¹, more than twice the spacing of ≈ 21 cm⁻¹ between the lines. The rotational structure is no longer resolved and a single broad band remains (Figure 4b), and free rotation gives way to restricted low-frequency motions in the far infrared. The vibration is still there, shifted and broadened by the environment (lessons 3 and 14).
Explore further: larger molecules and resolution
The line spacing is 2B, and B decreases with the moment of inertia. In HCl, 2B ≈ 21 cm⁻¹; for CO₂ (B ≈ 0.39 cm⁻¹), the spacing is about 1.6 cm⁻¹ (4B, because nuclear symmetry removes half of the lines), and resolving the lines requires a resolution better than 1 cm⁻¹. With 4 cm⁻¹, which is typical of routine ATR, the CO₂ lines are not resolved and appear as a band with a P–R contour. For large molecules, the P, Q and R branches overlap into a contour without individual lines, even in gas (Griffiths and de Haseth, 2007).
7. Common misconceptions
- “A molecule absorbs any energy.” Only the energy that meets resonance, the selection rule and the population.
- “At 0 K the molecule stops vibrating.” The zero-point energy remains, ½ hcν̃.
- “Gas, liquid and solid have the same levels.” Vibrational levels change little; free rotation only exists in gas.
- “Sharp lines indicate a better-quality spectrum.” They indicate gas; in a condensed sample, they are usually the air in the path.
- “Infrared shows only vibration.” In gas, it shows vibration accompanied by rotation.
8. Worked problems
Each problem applies a section of the lesson. Try to solve it before opening the solution. Constants: h = 6.626 070 15 × 10⁻³⁴ J s; c = 2.997 924 58 × 10¹⁰ cm s⁻¹; 1 u = 1.660 539 07 × 10⁻²⁷ kg; kBT/(hc) = 207.2 cm⁻¹ at 298.15 K.
Problem 1 · applies section 2
The rotational constant of HCl
Problem. For H³⁵Cl, re = 1.2746 Å (NIST) and the masses are 1.00783 u (H) and 34.96885 u (³⁵Cl). (a) What is the reduced mass? (b) And the moment of inertia I = μr²? (c) Calculate B in cm⁻¹. (d) What are the wavenumber, the wavelength and the frequency of the pure rotational transition J = 0 → 1 (2B)?
View solution
- (a) μ = (1.00783 × 34.96885)/(1.00783 + 34.96885) = 0.97959 u = 1.6267 × 10⁻²⁷ kg.
- (b) I = μ r² = 1.6267 × 10⁻²⁷ kg × (1.2746 × 10⁻¹⁰ m)² = 2.642 × 10⁻⁴⁷ kg m².
- (c) B = h/(8π² c I) = 10.59 cm⁻¹ (the tabulated value, Be = 10.59 cm⁻¹, is the same).
- (d) 2B = 21.2 cm⁻¹; λ = 1/(2B) = 472 µm; ν = c · 2B = 635 GHz.
Answer. μ = 0.980 u; I = 2.64 × 10⁻⁴⁷ kg m²; B = 10.59 cm⁻¹; the J = 0 → 1 transition is at 21.2 cm⁻¹ (472 µm, 635 GHz), at the boundary between microwaves and the far infrared.
Problem 2 · applies section 3
Who is occupied in HCl at 298 K?
Problem. Use B₀ = 10.44 cm⁻¹. (a) Which rotational level is the most populated (Jmax)? (b) How many times more populated is level J = 3 than J = 0? (c) What is the ratio N(v = 1)/N(v = 0) for the 2885.3 cm⁻¹ vibration?
View solution
- (a) Jmax ≈ √[ kBT/(2hcB) ] − ½ = √(207.2/(2 × 10.44)) − ½ = √9.92 − ½ = 2.65. The most populated integer level is J = 3.
- (b) N₃/N₀ = (2 × 3 + 1)/1 × exp[−B₀ · 3 · 4/207.2] = 7 × exp(−0.605) = 3.82.
- (c) N₁/N₀ = exp(−2885.3/207.2) = exp(−13.92) = 9.0 × 10⁻⁷.
Answer. Jmax ≈ 2.7, that is, J = 3; this level has about 3.8 times the population of J = 0 (the 2J + 1 degeneracy outweighs the loss of energy); and only one in 10⁶ molecules is in v = 1. Rotation is “hot”; vibration is not.
Problem 3 · applies section 5
Positions of the lines near the band center
Problem. With ν̃₀ = 2885.3 cm⁻¹, B₀ = 10.440 cm⁻¹ and B₁ = 10.133 cm⁻¹, calculate the positions of R(0), P(1), R(1) and P(2) (the number in parentheses is the J of the lower level). What is the gap between P(1) and R(0)? What happens to the spacing in the R and P branches?
View solution
- R(0) = ν̃₀ + 2B₁ = 2885.3 + 20.27 = 2905.57 cm⁻¹.
- P(1) = ν̃₀ − 2B₀ = 2885.3 − 20.88 = 2864.42 cm⁻¹.
- R(1) = ν̃₀ + 2(B₁ + B₀) + 4(B₁ − B₀) = 2925.22 cm⁻¹; P(2) = ν̃₀ − 2(B₁ + B₀) + 4(B₁ − B₀) = 2842.93 cm⁻¹.
- Gap: R(0) − P(1) = 41.14 cm⁻¹ (≈ 4B). Spacings: R(1) − R(0) = 19.65 cm⁻¹ and P(1) − P(2) = 21.49 cm⁻¹.
Answer. R(0) = 2905.6; P(1) = 2864.4; R(1) = 2925.2; P(2) = 2842.9 cm⁻¹. The central gap is 41.1 cm⁻¹. Since B₁ < B₀, the spacing is smaller in the R branch (19.7 cm⁻¹) than in the P branch (21.5 cm⁻¹): the R lines get closer together and the P lines spread apart.
9. Questions to consider
- Why does zero-point energy exist?
Answer
For an oscillator, stopping would mean having position and momentum defined at the same time, which the uncertainty principle forbids. The lowest-energy state keeps a minimum of motion: ½ hcν̃.
- Why does gaseous N₂ have neither a pure rotational spectrum nor a vibrational one in the infrared?
Answer
It is homonuclear: it has no permanent dipole and the vibration does not change it. It is Raman active, where the criterion is polarizability (lesson 1).
- Why does gaseous water have so many sharp lines scattered across the spectrum?
Answer
It is light and has small moments of inertia, hence large rotational constants: the rotational steps are large and the lines spread over hundreds of cm⁻¹ around each vibrational band.
- Why do the lines of the R branch get closer together and those of the P branch spread apart?
Answer
In v = 1 the bond is, on average, longer: larger I and B₁ < B₀. As a result, (B₁ − B₀) is negative and the quadratic terms make the spacing between neighboring lines decrease with J in the R branch and increase with J in the P branch.
10. Lesson summary
- Molecular energy adds up in three ladders: electronic, vibrational and rotational, with steps of very different orders of magnitude.
- The spacing shows the type of motion: constant in harmonic vibration, increasing in rotation; and it decreases with mass and size.
- By the Boltzmann distribution, vibration is almost entirely in v = 0 and rotation occupies many levels (maximum at J ≈ √[kBT/(2hcB)] − ½).
- In gas, the vibrational band of HCl splits into the P and R branches, with a central gap of ≈ 4B.
- In liquids and solids, free rotation disappears and a single band remains; sharp lines in a condensed sample are usually the air in the path.
Next lesson: molecules are in motion (lesson 5), the first of step 2.
11. Further reading
Good starting points: Atkins and Hollas. To go further: Herzberg and Griffiths and de Haseth.
- Atkins, P.; de Paula, J.; Keeler, J. Atkins’ Physical Chemistry. 11th ed. Oxford: Oxford University Press, 2018. Supports: particle in a box, harmonic oscillator, rigid rotor, Boltzmann distribution and selection rules (sections 1 to 4).
- Hollas, J. M. Modern Spectroscopy. 4th ed. Hoboken: Wiley, 2004. Supports: vibrational-rotational spectra, selection rules and nuclear-spin statistics (sections 3 to 5).
- Herzberg, G. Molecular Spectra and Molecular Structure. I. Spectra of Diatomic Molecules. 2nd ed. Princeton: D. Van Nostrand, 1950. Supports: P and R branches and the expressions for line positions (section 5).
- Huber, K. P.; Herzberg, G. Molecular Spectra and Molecular Structure IV: Constants of Diatomic Molecules. New York: Van Nostrand, 1979, in the NIST Chemistry WebBook data (hydrogen chloride, constants of diatomic molecules; accessed October 24, 2026): Be = 10.593416 cm⁻¹, αe = 0.307181 cm⁻¹ and re = 1.274552 Å. Supports: the HCl constants in sections 2, 3 and 5 and in the problems.
- Griffiths, P. R.; de Haseth, J. A. Fourier Transform Infrared Spectrometry. 2nd ed. Hoboken: Wiley-Interscience, 2007. Supports: water vapor and CO₂ lines and resolution (section 6).
- Stuart, B. H. Infrared Spectroscopy: Fundamentals and Applications. Chichester: Wiley, 2004. Supports: gas spectra and overview (section 6).
- Tiesinga, E.; Mohr, P. J.; Newell, D. B.; Taylor, B. N. CODATA recommended values of the fundamental physical constants: 2018. Reviews of Modern Physics, vol. 93, art. 025010, 2021. DOI 10.1103/RevModPhys.93.025010. Supports: h, c, kB and u (problems).
Edition, pages and content of the reference works must be checked directly; the list records the source of each statement and does not replace reading the original text. The estimate of rotational relaxation times in liquids (≈ 0.1 ps or more) is an order of magnitude for teaching purposes.
Original teaching material by espectroFTIR. Diagrams and signals calculated for teaching; they do not represent measured spectra.