LEARN IR · STEP 1 · LESSON 1

What is spectroscopy?

How light reveals what molecules are and what they do.

About 12 minutes · Prerequisite: understanding that molecular energy is quantized (energy levels exist) · Updated on 18/10/2026

In this lesson you will:
  • understand what a spectrum is and why each molecule has its own;
  • learn the rule that determines whether light is absorbed: resonance;
  • read spectral axes and the three clues provided by each band;
  • distinguish what infrared spectroscopy shows from what it cannot show alone.

1. Start with an image: the notes of a molecule

Play a note near a guitar and only the string tuned to that note starts vibrating. This is resonance: the string responds only to a frequency matching its own.

Molecules interact with light in a similar way. Each bond vibrates at characteristic frequencies and absorbs light whose energy matches the vibration. Recording how much light is absorbed at each energy produces a plot: the spectrum. It lists the “notes” that the molecule can absorb.

Key idea. Spectroscopy “listens” to molecular notes using light. Each spectral band is an absorbed note.

2. Three terms that overlap

In practice, the first two terms overlap. One distinction: mass spectrometry, despite its name, is not electromagnetic spectroscopy; it separates ions by their mass-to-charge ratio.

3. The governing rule: resonance

Atoms and molecules exist only in defined energy states involving vibration, rotation, electrons and spin. Light can cause a transition between states only if photon energy is exactly the difference between them:

ΔE = Efinal − Einitial = hν = hcν̃

When this condition is met, three processes are possible (Figure 1): the molecule absorbs a photon; emits a photon on returning to the initial state; or scatters light, exchanging energy with it, as in Raman scattering.

(a) AbsorptionE₁E₀hν = E₁ − E₀(b) Spontaneous emissionE₁E₀hν = E₁ − E₀(c) Raman scattering (Stokes)v = 1v = 0virtualhν₀hν₀ − hcν̃(vib) Absorption and emission involve real states; in scattering, the intermediate state is virtual and the energy difference remains in the molecule.
Figure 1. The three basic processes. In (a), a photon is absorbed and the molecule reaches a higher level; (b) is the reverse process; in (c), the incident photon is scattered with an energy loss equal to one vibrational quantum (Stokes; in anti-Stokes scattering, the molecule is already in v = 1 and the scattered radiation gains energy). Diagrams are not to scale.
Explore further: why an energetically possible transition may not occur

Besides resonance, a transition must be allowed: the transition moment ⟨f|μ̂|i⟩ must be nonzero. Its probability is proportional to the square of that moment, and net absorption also depends on the population difference between the two levels (Boltzmann distribution). This is the basis of selection rules, covered in lesson 7.

4. Different kinds of light ask different questions

Photon energy determines what changes in the molecule and therefore the technique:

RegionTransitionTechniquesTypical information
Radiofrequencynuclear spinNMRchemical environment and nuclear connectivity
Microwavesrotation; electron spinrotational spectroscopy; EPRgeometry (moments of inertia); species with unpaired electrons
InfraredvibrationIR absorption (FTIR); Raman scatteringbonds and functional groups, molecular environment, conformation and crystallinity
Visible and ultravioletvalence-electron transitionsUV–Vis; fluorescencechromophores, conjugation and concentration
X-raysinner-shell electronsXRF; X-ray absorption and photoemissionelemental composition and oxidation state
Two complementary techniques. In infrared spectroscopy, a vibration must change the molecular dipole moment; in Raman, it must change polarizability. This is why symmetric CO₂ stretching is invisible in IR but appears in Raman.

5. How to read a spectrum

The horizontal axis represents energy (in infrared spectroscopy, wavenumber, in cm⁻¹). The vertical axis indicates how much light was absorbed, through transmittance, T = I/I₀, or absorbance, A = −log₁₀ T.

Absorbance is widely used because it increases in proportion to the amount of material, according to the Beer–Lambert law, A = εcl where ε is molar absorptivity, c concentration and l optical path length, under ideal conditions.

v = 0v = 1v = 2v = 3v = 4v = 5v = 6(a) Bond potential well (Morse model)Internuclear distanceEnergy(b) Resulting absorption spectrum20003000400050006000wavenumber (cm⁻¹)0 → 1: 2885 cm⁻¹fundamental0 → 2: 5665 cm⁻¹first overtone
Figure 2. Example of a diatomic bond, gaseous H³⁵Cl, with spectroscopic constants ωₑ = 2990.95 cm⁻¹ and ωₑxₑ = 52.82 cm⁻¹, where E(v) = ωₑ(v + ½) − ωₑxₑ(v + ½)². (a) The Morse well and vibrational levels, whose spacing decreases with v (anharmonicity). (b) The 0 → 1 fundamental and 0 → 2 overtone transitions occur at positions corresponding to energy differences; the overtone lies slightly below twice the fundamental frequency and is much weaker. Schematic: in the gas phase, each band has rotational structure, omitted here.

Each band offers three clues:

Explore further: why an overtone lies below twice the fundamental

In Figure 2, vibrational levels become closer as v increases (anharmonicity). The 0 → 2 band therefore lies slightly below twice the fundamental frequency and is much weaker: it is allowed only through anharmonicity. In the gas phase, each band also has rotational structure, omitted from the figure.

6. What infrared spectroscopy reveals, and what it cannot reveal alone

An IR spectrum provides evidence about bonds and functional groups and their environment (hydrogen bonding, physical state, crystallinity and polymorphism). With calibration, it also permits quantification.

On its own, it does not provide molar mass, complete atomic connectivity or unequivocal substance identity. Identity assessment uses references measured with the same technique and, in difficult cases, orthogonal techniques such as NMR, mass spectrometry or diffraction.

When interpreting, keep four levels separate:

LevelExample
Observationthere is a strong, narrow band at ≈ 1715 cm⁻¹ and no bands above 3100 cm⁻¹
Assignmentthe band is compatible with carbonyl ν(C=O) stretching
Hypothesisabsence of O–H and N–H, together with the band pattern, suggests a ketone or ester
Conclusionrequires supporting bands, reference comparison and, if necessary, another technique

Common limitations include mixtures with overlapping bands, matrix and preparation effects, differences between techniques (ATR and transmission: lesson 10), physical state and data quality (lesson 12). One isolated band is never enough to identify a compound.

7. Common misconceptions

8. Worked problems

Each problem applies a lesson section. Try it before opening the solution.

Problem 1 · applies section 3

From transition energy to wavenumber

Problem. The 0 → 1 vibrational transition of gaseous HCl requires ΔE = 5.73 × 10⁻²⁰ J. What are the radiation wavenumber, wavelength and spectral region? Data: h = 6.626 × 10⁻³⁴ J s; c = 2.998 × 10¹⁰ cm s⁻¹.

View solution
  1. From the resonance condition, ΔE = hcν̃, so ν̃ = ΔE/(hc).
  2. hc = 6.626 × 10⁻³⁴ × 2.998 × 10¹⁰ = 1.986 × 10⁻²³ J cm.
  3. ν̃ = 5.73 × 10⁻²⁰ / 1.986 × 10⁻²³ = 2.885 × 10³ cm⁻¹.
  4. λ = 1/ν̃ = 1/2885 cm = 3.47 × 10⁻⁴ cm = 3.47 µm.
  5. Because 400 < 2885 < 4000 cm⁻¹, the radiation is mid-infrared. In molar-energy terms, 5.73 × 10⁻²⁰ J × 6.022 × 10²³ mol⁻¹ ≈ 34.5 kJ mol⁻¹.

Answer. ν̃ ≈ 2885 cm⁻¹, λ ≈ 3.47 µm, mid-infrared (≈ 34.5 kJ mol⁻¹).

Problem 2 · applies section 5

Transmittance, absorbance and concentration

Problem. (a) A band has T = 25%. What is its absorbance? (b) Another band has A = 0.30; if concentration doubles at the same optical path length and absorptivity, what are A and T? (c) A third band has A = 1.5. What fraction of radiation reaches the detector, and what does this indicate?

View solution
  1. (a) A = −log₁₀ T = −log₁₀ 0.25 = 0.602.
  2. (b) From Beer–Lambert, A = εcl is proportional to c: doubling concentration increases A from 0.30 to 0.60. Since T = 10−A, T changes from 10−0,30 = 50 % a 10−0,60 = 25 %.
  3. (c) T = 10−1,5 = 0.032, meaning about 3% of radiation reaches the detector.

Answer. (a) A = 0.602. (b) A = 0.60 and T = 25% (A varies linearly with concentration; T does not). (c) ≈ 3%: the band is near saturation, relative noise is greater and Beer’s law ceases to apply; its relative intensity should not be interpreted.

Problem 3 · applies section 5 and Figure 2

HCl fundamental and overtone

Problem. The vibrational levels of H³⁵Cl are E(v) = ωₑ(v + ½) − ωₑxₑ(v + ½)², in cm⁻¹, with ωₑ = 2990.95 and ωₑxₑ = 52.82. (a) Calculate E(0), E(1) and E(2). (b) Determine the 0 → 1 and 0 → 2 band positions. (c) Is 0 → 2 exactly twice 0 → 1? Why? (d) In which spectral region is 0 → 2?

View solution
  1. (a) With v + ½ = 0.5, 1.5 and 2.5: E(0) = 2990.95 × 0.5 − 52.82 × 0.25 = 1482.3 cm⁻¹; E(1) = 2990.95 × 1.5 − 52.82 × 2.25 = 4367.6 cm⁻¹; E(2) = 2990.95 × 2.5 − 52.82 × 6.25 = 7147.3 cm⁻¹.
  2. (b) ν̃(0 → 1) = E(1) − E(0) = 2885.3 cm⁻¹; ν̃(0 → 2) = E(2) − E(0) = 5665.0 cm⁻¹.
  3. (c) Twice the fundamental would be 2 × 2885.3 = 5770.6 cm⁻¹; 0 → 2 occurs ≈ 106 cm⁻¹ lower because levels get closer as v increases (anharmonicity). This transition is also allowed only through anharmonicity and is therefore much weaker.
  4. (d) λ = 10⁴/5665 = 1.77 µm, in the near-infrared, while the fundamental (3.47 µm) is mid-infrared.

Answer. The fundamental is at 2885.3 cm⁻¹ (3.47 µm, mid-infrared) and the first overtone at 5665.0 cm⁻¹ (1.77 µm, near-infrared), below twice the fundamental and much weaker because of anharmonicity.

9. Questions to consider

1. What is the difference between spectroscopy and spectrometry?

Spectroscopy studies systems through the radiation they interact with or emit; spectrometry measures that radiation to obtain information about the system. They overlap in practice, but the first names the phenomenon and method, while the second emphasizes instrumental measurement.

2. Bands at 2885 cm⁻¹ and 5665 cm⁻¹ belong to the same diatomic bond. Which is stronger, and why?

The 2885 cm⁻¹ band (fundamental, 0 → 1). The 0 → 2 overtone is allowed only through anharmonicity, and its transition moment is much smaller.

3. Why is symmetric CO₂ stretching absent from the IR spectrum?

Because the dipole moment does not change during this motion (the molecule is linear and symmetric). It is Raman-active, for which polarizability must change.

4. Why is a strong band at 1715 cm⁻¹ insufficient to conclude that the sample is a ketone?

Because esters, aldehydes, carboxylic acids, amides and other classes absorb in nearby regions. Supporting bands (C–O, O–H, N–H and aldehyde C–H), physical state and technique must be considered and compared with references.

10. Lesson summary

Next lesson: What is light? There we explore electromagnetic waves, wavenumber and conversion between quantities.

11. Further reading

Good starting points: Atkins and Stuart. For depth: Hollas, Griffiths and de Haseth.

  1. IUPAC. Compendium of Chemical Terminology (“Gold Book”). 2nd ed. Compiled by A. D. McNaught and A. Wilkinson. Oxford: Blackwell Scientific, 1997; online version (2019–) by S. J. Chalk. DOI 10.1351/goldbook. Supports: definitions of spectroscopy, spectrometry and spectrum (section 2).
  2. Atkins, P.; de Paula, J.; Keeler, J. Atkins’ Physical Chemistry. 11th ed. Oxford: Oxford University Press, 2018. Supports: quantization, resonance conditions, selection rules, Beer–Lambert law, Boltzmann populations and linewidth (sections 3–5 and problem 2).
  3. Hollas, J. M. Modern Spectroscopy. 4th ed. Hoboken: Wiley, 2004. Supports: transition types and techniques, IR–Raman complementarity and mutual exclusion (section 4).
  4. Huber, K. P.; Herzberg, G. Molecular Spectra and Molecular Structure IV: Constants of Diatomic Molecules. New York: Van Nostrand, 1979. Values used here are listed in the NIST Chemistry WebBook (hydrogen chloride, diatomic molecular constants), compiled by Huber and Herzberg with ground-state data from Rank et al. (1962, 1965): ωₑ = 2990.9463 cm⁻¹ and ωₑxₑ = 52.8186 cm⁻¹ (accessed on 18/10/2026). Supports: constants used in the figure and problem 3.
  5. Griffiths, P. R.; de Haseth, J. A. Fourier Transform Infrared Spectrometry. 2nd ed. Hoboken: Wiley-Interscience, 2007. Supports: infrared-spectrometry principles (sections 5 and 6).
  6. Stuart, B. H. Infrared Spectroscopy: Fundamentals and Applications. Chichester: Wiley, 2004. Supports: what the technique reveals about functional groups and their environment (section 6).

Consult the original editions, pages and content directly; this list records the source for each statement and does not replace reading the original text.

Original espectroFTIR teaching material. Diagrams and curves were calculated for teaching and do not represent measured spectra.